DHMSCare
EN
Log inView plans
DHMSCareView plans
Maintenance Q&A

Which equipment should my industry monitor first?

Conveyors, food, solar and chemicals: monitor the rotating equipment tied to continuous production first.

How do I monitor the motors, gearboxes and pulleys on a long belt conveyor so it does not break down?

Put wireless vibration sensors on the motor, gearbox and pulley bearings. For long runs, DHMSCare uses Bluetooth with 300 m line of sight plus repeaters, and the DG311 gateway connects over 4G for remote, unattended sections. Mina, the DHMSCare industrial AI agent, turns each early fault sign into steps to inspect and fix. In a DHMSCare coal mining case, transport system downtime fell by 70% and underground equipment failures fell by 60%.

Which equipment should a food plant monitor first, and will vibration sensors survive high-pressure washdown?

Monitor the critical rotating equipment first: mixers, fans, pumps and air compressors, where a stop hits production directly. The DHMSCare DS310 sensor is IP69-rated, so it withstands high-pressure washdown. In a DHMSCare food and beverage case, unplanned downtime fell by 68%, preventive-maintenance completion rose from 65% to 97%, and each line gained about 1,200 hours of running time a year.

We run a solar cell plant. Which equipment should we monitor first for predictive maintenance?

Start with the machines that keep production running: air compressors, vacuum pumps, circulating water pumps and exhaust fans, where one stop affects the whole line. In DHMSCare solar industry cases, core-equipment downtime fell by 50% and wafer breakage fell by 90%. With DHMSCare you start on one line of ten sensors, with self-serve deployment in 90 seconds.

Which equipment should a chemical plant monitor first, and will a corrosive atmosphere damage the sensors?

Start with the critical rotating equipment that runs nonstop: reactor agitators, pumps, fans and compressors. In corrosive atmospheres, choose sensors with a high ingress rating. The DHMSCare DS310 sensor is IP69-rated against dust and high-pressure water, but IP69 is not a corrosion rating, so confirm the mounting plan with DHMSCare for strongly corrosive areas. The DHMSCare chemical industry solution covers this equipment, with alerts accurate in 90%+ of cases.